Lightweight hangers

A lightweight hanger is a cost effective and simple string hanger for lightweight boards such as card, foam and Gataboard.

Light weight hangers

Top hangers

Comprising of 2 d-rings attached to the top of foam boards – only available for 20mm thick boards. It is ideal for ceiling hung displays and can be used where an image is mounted to both sides of the board.

Top Hanger

Foamboard hangers

Push in metal hangers for use on foam boards only. Can be used as top hanging or normal back hanging positions, but cannot be used for double sided mounts.

Foam board hanger

Wooden hangers

This comprises a strip of wood with 2 x d-rings attached. It is glued to the back of boards such as Gataboards, acrylics and plastics that do not accept a screwed fixing. It can be hung by the d-rings themselves or with cord tied between the d-rings.

wood hanger

Split baton hangers

Wooden hanging strips that mate to a matching strip that is affixed to your wall. Good for hanging heavy panels and where panels are to be securely hung with no movement.

Split batten hangers

Metal hangers

This comprises a strip of aluminum with 2 d-rings attached. It is glued to the back of boards such as Alupanels, Gataboards, acrylics and plastics that do not accept a screwed fixing. It can be hung by the d-rings themselves or with cord tied between the d-rings.
 

Metal hanger

U Channel Frames

These aluminum frames are designed to be glued to the back of mounted boards. They are set in from the edge and not visible from the front, making the mounted print space out or float off the wall. These frames are also structural – adding rigidity to mounted boards and acting as hanging points. They are available in 2 sizes – 12mm for works up to 15kg and 22mm for 15kg and more.
 

Small U Channel hangerSmall U Channel hanger